OnePlus 3 Review

OnePlus 3 Termed – Apple Killer

OnePlus has gradually grown to become a most wanted in spite of it being considered a loser to Samsung and Apple. The introduction of its OnePlus 3 would bestrengthening this reputation. OnePlus has been termed as an Apple killer and though it is doubtful of toppling the Californian behemoth, its new handset could take away a huge fraction of its loyal supporters. The OnePlus 3not only looks to be a good device but feels much more expensive than the price tag of £309. Similar like the HTC One Series together with several other modern smartphones, the OnePlus 3 is designed from a single piece of aluminium with attractive anodised finish having its back somewhat curved.

The metal edges are slightly rounded with slim diamond-cut chamfers which tend to catch the light just suitable giving our a reflective glimmer now and then. Due to its heavy aluminium alloy body, it tends to feel sturdy from the plastic casing of similar valued Android phones like the LG G4. The OnePlus 3 will be delivered with a pre-installed screen protector for additional shield. With a thickness of 7.3mm it is significantly thinner than the 9.9mm OnePlus 2 and its 5.5-inch 1080p Optic Amoled display tends to have `one of the thinnest bezels in the world’.

Bezel – Fine/Slim

This exceptionally thin bezel means that the phone does not feel big than the iPhone 6S and does not tend to feel as large as the 6S Plus, in spite of the nearly similar measurements. However, on the shortcoming, the thin bezel means that holding the phone could be problematic. The user would frequently select menus as well as app on the edges of the screen by mistake and having to hold it as it is delicate weakens away from the sturdy first impression.

While indoors, with the brightness set at around 50%, the screen tends to look quite bright. Its bezel seems fine and slim and hence the content on the screen seems to control the front panel. The screen is covered by Corning Gorilla Glass 4 which is so thoroughly laminated that the contents seem to practically float on the surface of the glass. The OnePlus 3 tends to run OxygenOS which is this years’ version 3, built above Android Marshmallow.

Dash Charge Technology

A noticeable thing regarding OnePlus’ software is that it tends to look and feel just like the regular stock Android though with some few twists. Within the OnePlus 3 is a top-of-the-line Snapdragon 820 process and it is quad-core. It has been paired with a huge 6GB RAM to make sure that one may never feel that the phone is lethargic. As the 6GB RAM tends to be yet new in the Android section, OnePlus has merely improved some of its built-in module to make use of it, in order that most of the time the complete memory will not be utilised.

Like several other Marshmallow phones, Google’s Doze mode means one could leave the OnePlus 3, overnight in standby mode and would only lose around a few percent from the battery level. Moreover, if the OnePlus 3 tends to run out of juice, it has the Dash Charge technology which seems to work the way VOOC flash charging does, which is used by the OPPO F1 Plus.

You could get around 60% charge from a 30 minute of charging on plugged in the wall while using the phone simultaneously. Charging from zero to full, in some cases, takes about 75 minutes and can be done without the phone heating too much, which is due to the thick USB cable that dispels heat as it tends to pump 20W of power to the phone.

Moto G4 Plus First Impressions

Moto G Series Smartphone Enters its Fourth Generation

Lenovo which tends to own the smartphone business of Motorola seems to be getting stronger and the formerly Google owned company is sticking to its main philosophy. The focus is on the Moto G series of smartphone that has entered its fourth generation and which is named `Moto G’ with references to the generation of the device like Moto G 2015 or Moto G 3rd Generation. The complete line-up, in fact is being broken down further and Lenovo is launching the Moto G4 Plus in India, soon while the Moto G4 would be coming in June.

The Moto G4 Plus is Motorola accepting some of the market developments though sticking to its own philosophy. It has a 5.5 inch 1080p display, a clear update from the 720p displays seen against the original Moto G. In Moto G4 Plus the colours do not pop and it is also a bitreflective. The most important update is the camera which has a 16Mp shooter on the back with laser auto-focus as well as PDAF and it has been claimed by Motorola that it is better than the iPhone 6 Plus. However, there is a considerable amount of processing time and the camera app launches slower than the older Moto G phones.

Moto G4 Plus – Two Options

This could be due to its added features such as HDR, Pro Mode and best shot that tends to make the app heavier. The lighting during the launch event was not suitable to take good shots but served to satisfy several users, at least in the sunlight. Motorola has utilised an Omnivision sensor for this smartphone. Besides this, another addition is the fingerprint sensor that does not make it to the Moto G4.

 Located on the front, the fingerprint sensor on the Moto G4 Plus is said to be square shaped and tends to feel new if not odd. It seems to have ridged design that feel unnatural and though it is not a button, it could be used to light up the screen or close an app. In India, the Moto G4 Plus comes in two options, for the version with 16GB internal storage and 2GB RAM forRs 13,499 and for 32GB internal storage and 3GB RAM for Rs 14,999.

Android 6.0.1 Marshmallow Operating System

The processor is the same for both options which has the Qualcomm Snapdragon 617 oct-core chip. Each model comes with a MicroSD card slot which can have an extra 128GB of additional storage in order that the added internal memory may not be a big concern. Beneath the screen lies the fingerprint sensor having an unusual square shape design. The operating system running on the device is Android 6.0.1 Marshmallow which in line with the promise of Motorola, seems to be most prevailing version available.

It also has a battery of 3,000mAh. A lot of specification is shared between the Moto G4 and the G4 Plus comprising of the 5.5 inch screen with 1080p resolution, a Snapdragon 617 processor together with a fast charging 3,000mAh battery while the Android version tends to remain the same together with the microSD card slot.

LG's new Fingerprint Reader Sits Under a Smartphone Screen

Fingerprint Readers – Abundant in Smartphone Designs

Fingerprint readers seem to be abundant in the designs of smartphone with queries like, whether they should include them or where to accommodate them. While some of the manufacturers have opted in adding readers in the button on the front or raised area on the back of the devices, LG Innotek has come up with a latest idea of putting it under the screen of the phone.

The LG associate had announced that it had created a new fingerprint sensor which has been inserted into a small 0.01 inch space cut in the underside of smartphone glass cover enabling the designers of the device to include fingerprint reader without committed button, pads or other exposed components. LG has stated that the fingerprint recognition rates on the under-glass module are comparable to button-kind sensor and could reduce any kind of smartphone malfunctions, together with bonus of enabling phone to be waterproof as well as scratch-resistant or only designed to appear sleeker.

No announcement has been made yet by the company whether it would be utilising this new module in any of the upcoming phone. However a spokesperson of LG had informed the Korea Times that the company is in talks with some smartphone manufacturers in order to commercialize the new sensors, within the year.

LG’s Fingerprint Sensor under the Display

Few years ago, Apple had begun pioneering smartphone fingerprint sensors in its smartphone with the iPhone 5s and since then various manufacturers had introduced fingerprint sensors on their smartphones. Presently, LG is pioneering and is touting its new fingerprint sensor which tends to sit under the display which means that when one tends to place their finger on the cover glass of the display, the under glass fingerprint sensor module seems to automatically identify your fingerprint.

As announced by Jongseok Park, CEO of LG Innotek, the under glass fingerprint sensor module will eliminate dedicated buttons, pad or other elements for fingerprint recognition and will also help in making the smartphone more water resistant by decreasing the number of openings. This could also be the cause of slimmer devices in the near future.

 LG Innotek has mentioned that it has cut 0.01-inch slot towards the back of the cover display glass and has set up a fingerprint sensor in it with `supreme precision and combination technology’.

Fingerprint Sensor Module – False Acceptance Rate – FAR

It has also been stated that the fingerprint sensor module tends to have a false acceptance rate – FAR of 0.002%. Besides this, LG also informs that the adherence side of the glass as well as the fingerprint sensor is 0.0098-inch thick, with the capability of resisting the impact of a 130 gram steel ball dropped from 7.9-inch. Changhwan Kim, Head of Research and Development Centre LG has mentioned that they are concentrating on all resources to the development of the differentiated technology based on the creation of customer value and will continue to provide convenient, safe and pleasant user experience by launching innovative product.

LG has not disclosed when precisely we would start seeing this technology in smartphone or the other devices. In December last year, the company had been tipped to supply Oled displays for their forthcoming iPhone models.